15844 Autoloader ALE: timeout moving balance weight actuator Trendsetter_VLF Check for a low value of the nvs parameter 'altim bct' (balance cylinder timeout). Verify that the balance cylinder extended/retracted sensors are working properly, and check the wiring/plumbing. This is not an operator servicable error. Press resume. Call CreoScitex service. Reset the machine to continue production. A command to move the balance cylinders to the extended or retracted position timed out, either because the timeout was too small, a failure moving the actuator, or a failed sensor. ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:33:22 2008 PST